OEM Contact Page
MaxVeloSSD™ RAM and SSD Cache Software from EliteBytes™ Limited
MaxVeloSSD™ is based on the reliable and high-performance VeloSSD Software. With the addition of unique fast RAM caching it opens the door to a new dimension of storage velocity. Breaking the bottlenecks of PCIe and SATA specifications it easily outperforms SSD speeds. MaxVeloSSD is faster than VeloSSD and SSD. It is a 2 level caching System, with a level 1 cache made out of system memory ( RAM) and a level 2 cache made out of SSD space. Designed to deliver ultimate caching speed it has reached its goal. Continuous Research, Development and Test. This software supports now up to 2 Petabyte Host Volumes. It requires only little RAM to manage Caching of these high Capacities. Compared to earlier Versions of this product the RAM footprint was reduced by more than 95%.
Change History MaxVeloSSD
MaxVeloSSD 3.1 is a great update because it brings super performance, innovation and maintenance of the product. List of changes in MaxVeloSSD 22.214.171.124: Version 3.1 takes for itself the fastest caching product to be. See below. New / Main points: Sophisticated speed optimization makes MaxVeloSSD about twice as fast as previous versions. Significantly better MBPS (> 5gb), IOPS (> 500,000), and latency (<.9 Î¼ second) are achieved. (Measured according to standard desktop hardware) On average, the performance is 100% higher than the previous version. See benchmarks on EliteBytes.com. All edition restrictions have been reduced. See Editions Matrix for details. The software can be activated on up to 3 different devices. There are also price cuts and upgrade paths. Please allow: The website content has not yet been fully adapted to the new product. USB support reworked, pull n repug features. The following buses are recognized as pull / plug: 1394 usb sd mmc. Can be installed. Setup installed on existing cache without reboot (only 1 reboot required). SSD cache can be expanded without reboot. See online manual. Bug fixes Little things: Chart color revised. Assisstent warns against cache from hostdisk (see wd dual drive). Detection of DAX volumes (Persistant Memory Direct Access Mode). Avoid the annoying warning of insufficient free space on the cache volume. Should available SSD volume for cache larger than host volume be prevented. Activation revised. The application detects removing and plugging the cache. Application displays cache hit ratio. International online help. International Online Manual available. The license key can be easily changed in test mode. Move to another computer is now possible. Error in the test version and activation area. Error fixed, ssd pull was still a reboot arranged though not necessary. Wrong message removed. Bug removed in connection with S.M.A.R.T and Hyper-V. Error removed the application terminates unintentionally. Error removed in the context of write "scan resist". Performance optimization: aggressive writeback slowed down foreground activity sometimes. The stability on computers with 4 GB of RAM and less has been further improved. Error solved in VeloShell: Aborting cache automatically load swapped resources leak. Issues: Changing the Nvme driver during operation can cause Performnce to impact the cache. You should install the driver of your trust beforehand and do not change it.
November 28 2017
Changes in Version 126.96.36.199
-better Performance with less Overhead int the background. MaxVeloSSD Version 188.8.131.52 This Update: -Complies to highest security Standards ( Signed with Extended Verification Certificate and countersigned by Microsoft WHQL ) (Now Windows 10 Secure Boot Compatible !) -Was tested positiv on latest Windows 10 1709 build 16251 / Server 2016 -Updated the build environment to the Visual Studio 2015 Build tool chain. -Much better performance compared to earlier versions when SSD and/or RAM Cache run over full. -Fixed Bsod "Attempted Switch from DPC" fixed. -Installer Wizard removed unnecessary steps / clicks. -Add Cache Wizard removed unnecessary steps / clicks. -better OS error handling in the driver, less Problems. -We dropped Support for XP / Vista. -Still Compatible from Window 7 on to latest Windows 10 builds. -"Scan Resist" Algorithm to optimize lomg term cache performance is vaillable again -"Direct Mode" ultra low latency RAM Cache i/o was further optimized. -Explorer Context Menu "Load Content into the Cache" with Icon Graphic. -A bug that could cause a crash of the Explorer was removed inbt the Shell Extension.
April 22 2017
July 11 2017
Changes in Version 184.108.40.206
The 3.1 Version is optimized for high IOPS and low Latency. Depending on the underlying hardware it is 40-60% faster then the 3.0 Version. This optimization took quite some effort, therefore it is a paid upgrade.
November 24 2016
Changes in Version 220.127.116.11
Thoroughly tested with newest Microsoft Windows OS. Allows for bigger SSD and RAM Caching than before, resulting in more caching power for the same price. The Product Activation Section was updated. This Version allows to pin files and Directories into Cache. Introducing the new WarpOver™ technology architecture. Finally the cache engine has been updated to be more robust in low memory conditions.
Changes in Version 18.104.22.168
The parallel performance control enables users to adjust the number of threads ( simultaneous executions of the cache engine ).
Changes in Version 22.214.171.124
Thoroughly tested under Windows 10. Bugs with multiple cache Data Volumes removed. Bugs in the Cache engine were removed. Bugs with recovery after power loss were removed. Recovery is now quicker, especially when the write cache is filled up. Earlier versions needed to write the Write Cache back completely before boot. That could result in frustrating long boot times. Internal corruption due Power loss / reset occurred every once and a while. This is fixed. If an internal on disk structure is corrupted ( possible write error while loosing power ) fallback failover recognizes and replaces it.
Changes in Version 126.96.36.199
Restart after power off / reset was reworked and will restore the Volumes State transaction safe in no time at the next startup. There is no Data loss or loss of Transaction safety. The system is restored to the state it had 0 to 10 seconds before the power off. Other small changes enhance quality of service of cache.
Changes in Version 188.8.131.52
The Cache engine was optimized to handle really big Volumes (up to 2 Petabyte ). There is no RAM memory overhead involved. Compared to earlier Versions the RAM usage in relation to Host Volume size was reduced by more than 95%. This is possible with our advanced caching algorithms that do not use “Cache Lines” or “Bitmaps” any longer.
Changes in Version 184.108.40.206
Reacting on public demand, we added “Write Through” and “Scan Resistant” Operating Modes to the Cache engine. The Application was extended to allow user changes and settings to these new Cache Modes. Please see the new Chapter: ”Scan Resist and Write Through”.
Changes in Version 220.127.116.11
The Software will run in all popular Virtual Machines. It exposes complete functionality with Pass through Disks and Virtual Disks. No restrictions. The Software implements S.M.A.R.T Services for Host and Cache Disks. It will warn the users if the Hardware is problematic. The Cache engine uses a new Read/Write Lock Algorithm that performs better than before. This is for peak performance. Several other changes improve stability and behavior after power loss / Reset.
Changes in Version 18.104.22.168
Added a feature that loads the cache with any Folder. Minimizes Cache heat up/ramp up time drastically. More about this in the Chapter “Load Folders in Cache”. This version adds also a chart control to the application. It allows precise visualization of IOPS/MBPS. Cache Hit/Miss and Data export in XML. There is also a chapter about Charting in this book. Support for Cache on Software RAID SSD Volumes was overworked. Windows 10 Preview compatibility was added. On big fragmented Cache a CPU Hog/Honk was removed ( Rare Condition) .Numerous Detail changes, please see the Change log for full reference.
Changes in Version 22.214.171.124
Version 126.96.36.199 Release of MaxVeloSSD. Support for USB3.0 and SDHC Cache Media was added. Many Laptop owners can now use any USB3.0 Stick to accelerate their HDD driven Laptop. This version includes several Bug fixes too that enhance stability. For full information see the change list.
Re-release of MaxVeloSSD. Commercial quality. The driver is guaranteed fail safe / crash proof in low memory scenarios and rare race conditions. This has been excessively tested with DriverVerifier, the W.H.C.K ( Windows Hardware Certifikation Kit ) and other software in our new test laboratory.
supports host and cache volumes with no drive letter. Compatibility with ExFat and ReFS file systems.
adds another powerful feature that enhances SSD lifetime and betters performance. For more information please look into the new “Write Elimination” Chapter.
MaxVeloSSD™ brings maximum velocity to your storage. SSD caching with MaxVeloSSD™ from EliteBytes™ delivers the free scalable and cost effective software solution to catapult your Windows environment from HDD to SSD speeds and beyond. Speeds up Operating system load time and any applications. Also minimizes cost for SSD storage. You can use any SSD on any Windows® operating system as caching device. Software and Hardware RAID configurations are supported. The maximum Volume size is 128 Terabyte. Traditional BIOS, modern UEFI native boot and Windows 8 secure boot are full supported.