HomeVeloRAM

Ram based caching software. Speeds up HDD and SSD based storage.

changing cache sizes: problems Messages in this topic - RSS

inetdude
inetdude
Posts: 14


3/30/2019
inetdude
inetdude
Posts: 14
After I installed the caches for my 4 volumes with standard cache sizes (8 GB per volume), I wanted to decrease the sizes of 3 volumes from 8 GB to 4 GB.

After changing the sizes and started a system reboot of the PC I got a blue screen before the PC shuted down.

After restarting the PC I noticed in the win explorer 2 of the volumes were not listed. This 2 volumes were listed in the disk management of win10, but they did not have volume letters. When I tried to re-assign volume letters, I got error messages saying this was not possible.

After a while I realised in the device manager there were to volumes shown as not installed by the system - after trying to activate them without success I uninstalled them in the device manager and rebooted the PC.

--> After Win10 became active again all the 4 volumes were OK, but the ram caches of the 2 lost volumes did not change to 4 GB!

--> I had to un-install VeloRAM completely from the system, restart the computer and install again VeloRAM and add again the caches to the 4 volumes with the desired values.

--> This happened 4 days ago.

Again, I wanted to change ram caches of 2 volumes yesterday --> same problems (1 volume went lost!) --> deleted in device manager and reboot --> cache not changed --> un-installed VeloRAM again --> after new installation of VeleRAM, created ram caches for all 4 volumes.

==> changing ram caches does not work on running VeloRAM! It has to be completed un-unstalled first...
0 link
bodo
bodo
Administrator
Posts: 98


4/3/2019
bodo
bodo
Administrator
Posts: 98
Please excuse the delayed response. We will build a digital twin of your report and see what happens. And post here any results.
0 link